Imation™ DC Paper Product Information

Imation™ DC Paper Product Information

[ Download the PDF version of this document ]

Description

DC paper is a high intensity daylight contact paper for production of high quality black-and-white proofs and contact prints from line and halftone negatives or positives.

Features

Subdued white light handling
Reflective density 1.70 to 1.90; may vary with densitometer
Compatible with most rapid access chemistries

Safelights

Handle paper under subdued white or high illumination yellow lighting at least 4 feet (1.2 meters) from the paper surface until processed.

Recommended Safelighting:

Illumination Technology Ultra White Arm-A-Safelight
EncapSulite™ UV Daylight White, No. C-20

Storage

Keep unexposed paper and processed paper in a cool, dry place. Process paper as soon as possible after exposure.

Exposure

Exposure Source

Multilevel, high-intensity 1000 to 1500 metal-halide modular exposure source (for higher intensity exposure sources, a light attenuator may be necessary).

Exposure Suggestions

Exposure for best dot reproduction varies with lamp, lamp distance and processing combinations. For uniform light distribution with open contact frames, follow the manufacturer's recommendations for lamp height adjustment.
Perform an exposure time series test to determine the best exposure for particular lamp and lamp distance combinations. Starting exposure recommendation: 5 to 20 seconds at 36 to 60 inches from exposure plane.
Light falloff from the center to the edge of the exposure source may effect reproduc- tion quality. To ensure optimum reproduction, check for light falloff.

Processing

DC paper is best suited for rapid access processing. Refer to the container labels for mixing and other instructions regarding the processing chemicals.

Processing Recommendations Before handling or using any chemical product, be sure to read the Material Safety Data Sheet for health hazard data, precautionary information and suggested first aid.

Use these recommendations as a starting point. For optimum results, use:

RLD rapid laser developer (1:4)
RLF rapid laser fix (1:6 or 1:5)

Processing time for paper can be shortened if processing exclusively from film. Use a 20 second starting point when processing under this condition.

Process Time Temp Replenishment Rate (50% Area Exposed)

RLD developer* 20-40 seconds 95°F (35°C) 0.40 ml per sq inch (620 ml per sq meter)

RLF fix 20-40 seconds 90°F (32°C) 0.35 ml per sq inch (540 ml per sq meter)

* These conditions are also applicable to most rapid access processing chemistries.

Important Notice to Purchaser:

All statements, technical information and recommendations contained herein are based on tests Imation believes to be reliable, but the accuracy of this information is not guaranteed.

Limited Warranty and Limitation of Remedies:

Imation warrants only that the Imation products described above will meet the published warranty applicable to said Imation products.

THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY, THE IMPLIED WARRANTY OF FITNESS FOR ANY PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF DEALING OR OF PERFORMANCE, CUSTOM OR USAGE OF TRADE EXCEPT OF TITLE AND AGAINST PATENT INFRINGEMENT.

If any Imation product is found not to meet the above-stated warranty, Purchaser's exclusive remedy and Imation's and/or Seller's only obligation is to repair, replace the product or refund the purchase price, at Imation's or Seller's option, within a reasonable time after written notification but no later than sixty (60) days after discovery of the defect, all as specifically stated in Imation's published warranty. IMATION WILL NOT UNDER ANY CIRCUMSTANCES BE LIABLE FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES (INCLUDING BUT NOT LIMITED TO LOSS OF PROFITS, REVENUE, OR BUSINESS) IN ANY WAY RELATED TO THE IMATION PRODUCTS, REGARDLESS OF THE LEGAL THEORY ASSERTED.